Installations » Shower in concrete
Step 1. Break the concrete floor open to find the waste pipe.
Step 2. After marking the size of the shower grit-cut the concrete 15 mm deep.
Step 3. Concrete cubes break out easily.
Step 4. Connect the Leak Control Flange to the waste pipe and refill the hole.
Step 5. Apply tile adhesive to concrete and polyurethane glue to Flange.
Step 6. Install the 10mm Slim-Board and level it out.
Step 7. Sealing off all joints and corners with sealing tape and waterproof membrane.
Step 8. Get the walls first and than the floor around the shower base tiled.
Step 9. Finally get the shower base tiled and the waste grate inserted.
Step 10. Sealing off all open gaps/joints in the corners and around waste grate with sanitary silicone.